SCLA Classes for April
27, 28 2012
Friday
5:30p - 9p
Beginners
class
Instructor:
Rhoda McClain/Richard Melton
Rhoda
will cover the history of locksmithing as well as the tools
of the trade. There will also be various mortise locks
available for
picking and hands-on making keys to the locks; both by depth keys and
code
machine. Keyblank identification will also be covered; and
Richard will
lead a basic introduction to master keying systems and how to make more
money
satisfying your customers' needs in this area.
Please
bring all tools you would use in picking
and rekeying lock cylinders.
Cost:
Free
Friday
5:30p - 9p
Marketing
your business
Instructor:
Fred Paxton
Fred
will cover a variety of ways to market your business in
todays' advanced technological environment. His best
practices, as
well as a round table discussion of your own successful marketing
ideas,
will be the main focus of increasing your bottom line.
The money and the needs are there; you just have to broaden your
awareness
of how to go get it.
Cost:
Free
Saturday
9:30a - 1p
Automotive GM 10-cut
Instructor: Jeff Owens
Jeff
will focus on the GM 10-cut lost key situation; as well as
repairing and making money on ignition replacements using the
determinator
and A1 GM kit respectively. This is an increasing area of need
due to
worn out ignitions and keys. There will be a hands-on portion
and he
plans to show actual in-the-field video of GM in-dash ignition
work being performed.
Cost:
$30 before April 1 or $45 after
Saturday
9:30a - 1p
Small
Format I/C core
Instructor:
Richard Melton
Richard
will cover the ins and outs of pinning and master keying
the small format interchangeable core system. Hands-on picking,
decoding and
master keying will be the main focus, so
bring all tools you will need in these areas to be able to
participate
fully.
Cost: $30 before April 1 or $45 after
Saturday
2p - 5:30p
Safe Whispering
Instructor:
Yvon LeDoux
Yvon
and Eric lead a terrific safe penetration class last quarter;
but it could have been a three-day event with the amount of
information
involved. Yvon will lead this hands-on
class attacking relockers, scoping the change-key hole,
and many
other manipulative ways to penetrate a locked container.
Cost:
$40 before April 1 or $60 after
Saturday
2p - 5:30p
Advanced Automotive
Instructor:
Steve Myslik
We
welcome Steve's vast knowledge and teaching skills back to the
association while he comes to demonstrate how to make keys for VW's and
Audi's. He will cover the mechanical aspect, by making the first
key, as
well as the electronic aspect of reading the PIN and programming the
key to the
car. He will also cover what the Superchip can do for you and how
the
AD900 (Advanced Diagnostic Cloner) can save and make you lots of
money.
Cost:
$40 before
April 1 or $60 after
RSVP
soon to get the price break!